Buzil Induseal Cover F 200

Product description

Clear in use. Reliable in results.

Use and application

Materials: Asphalt flooring, Cast stone and terrazzo | bitumen-bound, Cement and concrete screed, Concrete stone and terrazzo | calcareous, Concrete stone and terrazzo | non-calcareous.

Dosing

The surface should be roughened with a diamond pad (220 grit) and then completely cleaned of concrete grinding sludge. Afterwards, the surface should be wet-cleaned with a scrubber-dryer. The surface must be dry, solid, clean, absorbent, free of sintered layers, oil, grease and other release agents or similar contaminants. Stir the product thoroughly with the stirring attachment (min. 1–2 minutes). The product is applied evenly to the floor covering using a short-pile microfibre roller (pile length 6–10 mm) (use a scraper grid). Layer 1: Apply the material thinly in one direction using a roller. Then go over it with an empty roller in a criss-cross pattern (by a second person). Layer 2: Apply the material thinly in one direction with a roller. Then go over it with an empty roller in a criss-cross pattern (by a second person). Depending on the absorbency, roughness and condition of the surface, the following guideline values should be used: 75–125 g/m²/layer. Apply fresh application solutions and consume them within 24 hours at the latest. undiluted.

Downloads

• Buzil · productdocumentatie / documentation / documentación

• Product line: Buzil